INCH-POUND A-A-51159B
25 September 2000
SUPERSEDING A-A-51159A
10 November 1993
COMMERCIAL ITEM DESCRIPTION
CRIMPING AND BEADING MACHINES, SHEET METAL, MANUALLY OPERATED, ROTARY TYPE, DEEP THROAT STYLE
The General Services Administration has authorized the use of this commercial item description for all federal agencies.
1. SCOPE. This commercial item description (CID) establishes the government acquisition requirements for manually operated, sheet metal, rotary type, deep throat style crimping and beading machines to be used in sheet metal and other metalworking shops.
2. CLASSIFICATION. The crimping and beading machine shall be of a single type, and unless specified otherwise in the acquisition order (see 7.4(b)), shall be one of the following sizes:
2.1 Size. See table I.
TABLE I. Sizes and capacities.
Size Code |
Capacity mild steel, (gauge) |
Distance between shaft centers, inches (min.) |
Distance, center of rolls to gauge, inches (min.) |
24 |
24 |
1-1/4 |
5-3/4 |
22 |
22 |
1-1/2 |
5-3/4 |
20 |
20 |
1-1/2 |
5-3/4 |
18 |
18 |
2 |
12-3/4 |
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: Defense Supply Center Richmond (DSCR), ATTN: DSCR-VBD, 8000 Jefferson Davis Highway, Richmond, VA 23297-5610.
AMSC N/A FSC 3441
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business