[INCH-POUND] A-A-51172A
26 January 2000
SUPERSEDING A-A-51172
18 September 1987
COMMERCIAL ITEM DESCRIPTION
FORMING MACHINE, SHEET METAL, ROTARY, MANUALLY OPERATED, BENCH MOUNTED COMBINATION TYPE
The General Services Administration has authorized the use of this commercial item description as a replacement for A-A-51172 for all federal agencies.
1. SCOPE. This commercial item description (CID) establishes the government acquisition requirements for rotary, manually operated, bench-mounted combination sheet metal forming machines to be used for turning, burring, wiring, edging, flattening, or flanging operations.
2. CLASSIFICATION. The sheet metal forming machines shall be classified and identified by
the styles and sizes specified in 2.1. The selected style and size of machine to be supplied shall be specified in the acquisition order (see 7.5 (b)).
2.1 Styles and sizes.
Style A - Regular throat
Size 18 - 18 gauge (0.0478 inch) capacity Size 22 - 22 gauge (0.0299 inch) capacity Size 24 - 24 gauge (0.0239 inch) capacity
Style B - Deep throat
Size 22 - 22 gauge (0.0299 inch) capacity
Size 24 - 24 gauge (0.0239 inch) capacity
3. SALIENT CHARACTERISTICS. The sheet metal forming machine shall be produced in accordance with the manufacturer's standard design and shall be supplied in new condition. The performance capabilities and dimensions of the machine shall meet the requirements specified in table I for each listed style and size.
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any other data which may improve this document should be sent to: Defense Supply Center Richmond (DSCR), ATTN: DSCR-VBD, 8000 Jefferson Davis Highway, Richmond, VA 23297-5610.
AMSC N/A FSC 3441
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business