[INCH-POUND] A-A-50962A
7 July 1998
SUPERSEDING A-A-50962
24 February 1984
COMMERCIAL ITEM DESCRIPTION
FORMING MACHINE, SHEET METAL, SLIP ROLL, HAND OPERATED AND ELECTRICAL MOTOR DRIVEN
The General Services Administration has authorized the use of this commercial item description for all federal agencies.
1. SCOPE. This commercial item description (CID) covers hand operated and electrical motor driven, slip roll, sheet metal forming machines which are intended for producing cylindrical or conical sheet metal sections.
2. CLASSIFICATION. The forming machine shall be of the following types, styles, and sizes. Size refers to the nominal roll diameter and the mild-steel work piece capacity the machine and accommodate. The type, style, and size to be furnished shall be as specified (see 7.2(b)).
Type I - Manual (hand cranked)
Type II - Powered (electrical motor driven)
Style A - Bench mounted
Style B - Floor mounted
Size - (See table I)
Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be sent to: Defense Supply Center Richmond, ATTN: DSCR-VBD, 8000 Jefferson Davis Highway, Richmond, VA 23297-5610.
AMSC N/A FSC 3441
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business