A-A-50962A
a. Points of lubricant application. b. Servicing interval.
c. Type of lubricant(s) with SAE number or lubricant identifier.
4. REGULATORY REQUIREMENTS
4.1 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4.2 Environmental protection. The item shall meet all applicable Environmental Protection Agency restrictions in effect on the date of the contract. These regulations apply to the emission of materials hazardous to the environment or the user's health and shall be met during the manufacturing, service, transportation, storage, and operation/use of the item.
5. QUALITY ASSURANCE PROVISIONS
5.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producer's own drawings, specifications, standards and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.
5.2 Inspection. The forming machine shall be inspected to determine compliance with all requirements specified in this CID.
5.3 Testing. Unless otherwise specified (see 7.2(l)), the forming machine shall be tested in accordance with requirements herein. The forming machine shall be operated in accordance with the manufacturer's standard operating procedures. The test results will be compared to the performance requirements shown in table I. The material shall be a piece of annealed sheet steel with a thickness equal to the capacity of the machine and a width equal to the effective working length of the rolls. The cylinder shall be formed with no more than two passes through the rolls and shall not deviate from a true cylinder by more than 1/16 inch.
5.4 Acceptance. Unless otherwise specified (see 7.2(m)), preliminary and final acceptance tests shall be conducted at the manufacturer's site. The results of the performance tests shall be compared to the performance requirements shown in table I. Failure of the machine to meet the performance requirements shown in table I shall be cause for rejection.
6. PACKAGING. Preservation, packing, and marking shall be as specified (7.2(n)).
7. NOTES
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business