MIL-F-80069D
4.
QUALITY ASSURANCE PROVISIONS
the
specified in
4.1 Responsibility for inspection. Unless otherwise
contract or purchase order. t he contractor is responsible for the performance
of all inspection requirements (examinations and tests) as specified herein.
Except as otherwise specified in the contract or purchase order, the
contractor may use his own or any other facilities suitable for the
unless
herein,
requirements specified
the inspection
performance of
disapproved by the Government. The Government reserves the right to perform
any inspections set forth in the specification where such inspections are
deemed necessary to ensure supplies and services conform to prescribed
requirements.
4.1.1 Responsibility for compliance. All items shall meet all requirements
of sections 3 and 5. The inspections set forth in this specification shall
become a part of the contractor's overall inspection system or quality
program. The absence of any inspection requirements in the specification
shall not relieve the contractor of the responsibility of ensuring that all
products or supplies submitted to the Government for acceptance comply with
as part of
Sampling inspection,
contract.
all requirements
of the
manufacturing operations, is an acceptable practice to ascertain conformance
to requirements, however, this does not authorize submission of known
defective material, either indicated or actual, nor does it commit the
Government to accept defective material.
4.2 Classification of inspections. The inspection requirements specified
herein are classified as follows:
First article inspection (see 4.4).
a.
Quality conformance inspection (see 4.5).
b.
all
4.3 Inspection conditions. Unless otherwise specified (see 6.2),
inspections shall be performed in accordance with the test conditions
specified in 4.7.1.
4.4 First article inspection. When a first article inspection is required,
it shall be applied to the first article submitted in accordance with 3.1.
Unless otherwise specified (see 6.2), first article inspection shall consist
of the examination in 4.6 and all tests in 4.7. The machine shall pass the
first article examination and all tests, to be accepted.
4.5 Quality conformance inspection. Quality conformance inspection shall
be applied to each item prior to being offered for acceptance under the
specified - (see 6.2),
quality
conformance
contract.
Unless otherwise
inspection shall consist of the examination-in 4.6, the tests in 4.7, and the
inspection in 4.8. The machine shall pass the examination, all tests, and the
inspection to be accepted.
compliance
4.6 Examination. The machine shall be examined to determine
with all requirements of this specification.
1 --
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business