MIL-G-26869D
(Non-Government standards and other publications are normally available
from the organizations that prepare or distribute the documents. These
documents also may be available in or through libraries or other informational
services.)
In the event of a conflict between the text of
2.3 Order of precedence.
this document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
REQUIREMENTS
3.
3.1 First article. When specified (see 6.2), one complete machine shall be
subjected to first article inspection (see 6.3) in accordance with 4.4.
3.2 Design. The machine shall be new (not a prototype) and one of the
manufacturer s current production models capable of operations in accordance
with the requirements herein. The machine shall include all components,
parts, and features necessary to meet the performance requirements specified
herein. All parts subject to wear, breakage, or distortion shall be readily
accessible for adjustment, replacement, or repair. The machine shall be power
operated, designed to perform sheet metal forming operations through the use
of a powered head on a carriage, which rolls the specified shapes, by the
application of mechanical pressure on the workpiece.
3.2.1 Measuring and indicating device calibration. Measuring and indicat-
ing devices shall be graduated in inch-pound (see 6.4.1), metric (see 6.4.2),
or dual (inch-pound and metric) units as specified by the procuring activity
(see 6.2). Regardless of the measurement system used, all measuring and
indicating devices on the machine shall be graduated in the same system.
3.2.1.1 Dials. Dials shall be permanently and legibly engraved or etched
on a nonglare background with graduations that can be read from the operator's
normal position.
3.2.2 Reclaimed materials. The machine may contain reclaimed materials to
the maximum extent Possib le provided such materials will not jeopardize the
intended use, performance, or design life of the machine. Reclaimed materials
shall have been collected or recovered from solid waste and reprocessed to
become a source of raw materials, as opposed to virgin raw materials. None of
the above shall be interpreted-to mean that the `use of used, rebuilt, or
remanufactured products are allowed under this specification.
3.2.3 Energy efficiency. The machine and its components that directly
consume energy in normal operation shall be designed and constructed for
energy efficiency in accordance with the developments available within the
industry.
pneumatic
operating
hydraulic, and
3.2.4 Controls. All mechanical,
controls shall be located convenient to the operator's work station(s).
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business