MIL-S-45860D
AMERICAN NATIONAL STANDARD INSTITUTE (ANSI )
ANSI B11.7 - Safety Requirements for the Construction, Care,
and Use of Cold Headers and Cold Formers.
(Application for copies should be addressed to the American National Stan-
dards Institute, 1430 Broadway, New York, NY 10018-3363.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D 3951 - Standard Practice for Commercial Packaging.
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race St., Philadelphia, PA 19103-1187.)
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 79 - Electrical Standard for Industrial Machinery.
(Application for copies should be addressed to the National Fire Protection
Association, Batterymarch Park, Quincy, MA 02269-9101.)
NATIONAL FLUID POWER ASSOCIATION INC (NFPA)
NFPA/T2.25.1M - Pneumatic Fluid Power-Systems
Standard for Industrial Machinery.
(Application for copies should be addressed to the National Fluid Power
Association, Inc., 3333 N. Mayfair Road, Milwaukee WI 53222-3291.)
(Nongovernment standards and other publications are normally available from
the organizations which prepare or distribute the documents. These documents
also may be available in or through libraries or other informational ser-
vices. )
2.3 Order of precedence. In the event of a conflict between the text of
this specification and the references cited herein the text of this specifi-
cation shall take precedence. Nothing in this specification, however, shall
supersede applicable laws and regulations unless a specific exemption has been
obtained.
REQUIREMENTS
3.
3.1 First article. When specified in the contract or purchase order (see
6.2.1), a sample shall be subjected to first article inspection (see 4.4 and
6.3).
3.2 Design. The shrinking and stretching machine shall be new (not a
prototype) and one of the manufacturer's current production models. The
machine shall be capable of shrinking and stretching ferrous and non-ferrous
metal through the application of compression or tension force on the metal
which is gripped in sliding jaws, in accordance with the requirements herein.
The machine shall consist basically of a "C" type frame with a ram for
application of pressure to the
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business