MIL-S-45860D
Unless otherwise specified (see 6.2.1), the machine shall
3.3.5 Painting.
be painted in accordance with the manufacturer's standard commercial practice
and color.
3.3.6 Threads. All threaded parts, either US or SI, used on the machine
and its related attachments and accessories shall conform to FED-STD-H28, and
the applicable "Detailed Standard" section referenced therein.
3.3.7 Gears. All gears shall be constructed from a material suitable for
the intended purpose. All drive gears shall have the hardness, surface fin-
ish, and toughness that will enable the gear train to transmit full rated
torque of the drive motor without gear damage, failure, or premature dete-
rioration and wear.
3.3.8 Electromagnetic interference control. When specified (see 6.2.1),
applicable equipment furnished under this specification shall comply with MIL-
STD-461. The equipment and subsystems class-and the emission and susceptibil-
ity requirement shall be as specified.
3.4 Components. The machine shall consist of not less than a frame,
base, ram, and jaw assemblies. Any additional components necessary to the op-
eration of the machine to its capacity as specified in tables I, 11, III, and
IV shall be furnished.
TABLE I- Type I-manually operated, sizes and capacities.
TABLE II- Type II-pneumatically operated, sizes and capacities.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business